NAME FORGED SOCKET WELDED TEE
 MATERIALA105.A420-WPL6.A234-WP5,A234-WP9,A234-WP11,A234-WP12,A234-WP91.A403-WP304.A403-WP304L.A403-WP316.A403-WP316L,A694-F42,A694-46,A694-F48,A694-F50,A694-F52,A694-F56,A694-F60,A694-F70,A694-F80
 SIZE1/8"-3",DN6-DN80
 PRESSURE3000LB,Sch80
 STANDARDS ISO, ANSI. JIS . DIN GB/T14383,GB/T14626,ASME B16.11,
 SH3409,HGJ10,HGJ529,MSS SP-43,MSS SP-83,MSS SP-97
 USE Petroleum, chemical, power, gas, metallurgy, shipbuilding, etc. 

SOCKET TEE PRODUCT CONSTRUCTION

 NAME FORGED SOCKET WELDED CROSS
 MATERIALA105.A420-WPL6.A234-WP5,A234-WP9,A234-WP11,A234-WP12,A234-WP91.A403-WP304.A403-WP304L.A403-WP316.A403-WP316L,A694-F42,A694-46,A694-F48,A694-F50,A694-F52,A694-F56,A694-F60,A694-F70,A694-F80
 SIZE1/8"-3",DN6-DN80
 PRESSURE3000LB,Sch80
 STANDARDS ISO, ANSI. JIS . DIN GB/T14383,GB/T14626,ASME B16.11,
 SH3409,HGJ10,HGJ529,MSS SP-43,MSS SP-83,MSS SP-97
 USE Petroleum, chemical, power, gas, metallurgy, shipbuilding, etc. 

SOCKET CROSS  PRODUCT CONSTRUCTION

Nominal Pipe
Size
Depth of Socket
Dimension of Socket

Wall Thickness

Center to Bottom of Socket
A
Cmin
Tees

Crosses
DN NPS Jmin d1 3000LB
Sch80
6000LB
Sch160
9000LB
XXS
3000LB
Sch80
6000LB
Sch160
9000LB
XXS
3000LB
Sch80
6000LB
Sch160
9000LB
XXS
6 1/8 10 10.7 3.2 3.5
-
11 11 - 11 11 -
8 1/4 10 14.1 3.3 4.0 - 11 15 - 11 15 -
10 3/8 10 17.5 3.5 4.4 - 13 15 - 13 15 -
15 1/2 10 21.8 4.1 5.2 8.2 16 19 25 16 19 25
20 3/4 13 27.4 4.3 6.1 8.6 19 22 28 19 22 28
25 1 13 34.2 5.0 7.0 10.0 22 27 32 22 27 32
32 11/4 13 42.9 5.3 7.0 10.6 27 32 35 27 32 35
40 11/2 13 48.3 5.6 7.8 11.2 32 38 38 32 38 38
50 2 13 61.1 6.1 9.5 12.2 38 41 41 38 41 41
65 21/2 16 76.9(73.8) 7.7 12.5 - 41 57 - 41 57 -
80 3 16 89.8 8.3 13.8
-
57 64 - 57 64 -
100 4 19 115.5 9.4 -
-
66 - - 66 - -

1,WHAT ARE GIVEN IN THIS TABLE LIST ARE THE SAME PART SIZE OF VARIOUS SOCKET PIPE FITTINGS FOR CORRESPONDING STANDARDS.
2,3000,6000,9000 ARE PRESSURE GRADE CODE, LB/in. IS THE UNIT. sch80,sch160,XXS ARE WALL THICKNESS CODE. 
3,45ELBOW AND 90ELBOW ARE REDUCING, FLOW APERTURE DIMENSION d2 SMALLER THAN THE CORRESPONDING NOMINAL PIPE d2.
4,WALL THICKNESS Cmin  IS THE MINIMUM OF ANY POINT
5,THE REDUCING PIPE FITTINGS: THE LENGTH A BETWEEN THE CENTER OF NARROW END AND  THE BOTTOM OF DIMENSION OF SOCKET EQUALS TO THE OPENER END A.
6,ACCORDING TO THE CLIENTS' REQUIREMENT THE SOCKET PIPE FITTINGS ALSO CAN BE MADE WITH THREAD

PRESSURE GRADE TABLE OF THE SOCKET PIPE FITTINGS
THE WALL THICKNESS TABLE OF THE SMALL END DIAMETER
THE TABLE OF DIMENSION OF SOCKET
THE TOLERANCE LIMITS TABLE OF SOCKET PIPE FITTINGS